Alaris Medsystem III Lower Housing Clips Part # 28605039 | Biomedix Medical, Inc

“Alaris Medsystem III Main Battery Pack Assembly” has been added to your cart. View cart

lower housing clips

Alaris Medsystem III Lower Housing Clips Part # 28605039

$15

Alaris Medsystem III Lower housing assembly part # 2860539

SKU: 2860539 Category: Parts/Accessories Brand: Alaris

✓ No Sales Tax
✓ 1 year warranty on equipment orders
✓ Commercial financing available for orders over $2,000

Alaris Medsystem III Lower Housing – clips part # 28605039

Pair of 2

Alaris Infusion Pump Specifications

Dimensions

Height: 8.8 In (22.4 cm)
Width: 6.9 In (17.5 cm)
Depth: 9 In (22.9 cm)
Weight: 7.2 lb (3.2 kg)

Battery

Battery run time is a function of the number of modules attached and module activity. With a new, fully charged battery, the system operates as follows before a “BATTERY DISCHARGED” message occurs:
6 Hours: with one Pump module infusing at 25 mL/h
6 Hours: with one Pump module infusing at 25 mL/h and one Auto-ID module
3 Hours: with four Pump modules infusing at 25 mL/h
3 Hours: with four Pump modules infusing at 25 mL/h and one Auto-ID module
4.5 Hours: with one active SpO2 module
6 Hours: with one Syringe module or PCA module infusing at 5 mL/h
3 Hours: with four Syringe modules, or one PCA module and three Syringe modules, infusing at 5 mL/h
4 Hours: with one active EtCO2 module

Communication Data Port

RS-232 with an RJ45 connector

Memory

The System configuration/data set is stored in compact flash memory along with operating software.
The events and error logs are stored in the onboard flash memory in the Alaris PC unit and modules. This is a nonvolatile memory and can be held indefinitely or until replaced with new data and not lost when power is turned off or the battery is in a weak/discharged state.
Module-specific parameters are stored for 8 hours when the system is turned off. After 8 hours of continuous off-time, or if a module is detached, module-specific trend data (if applicable) and module-specific operating parameters are automatically purged. If a PCA, SpO2, or EtCO2 module is detached and replaced with another PCA, SpO2, or EtCO2 module, its module-specific trend data is purged.
Memory will not be lost due to a weak/discharged battery as data is stored on flash memory as noted.
Compact flash memory: Stores application software, audio wave files, DataSet, and hex files data for operating system software, all needed to operate the Alaris PC Unit System.
On-board flash memory: Contains software needed to initially turn on the Alaris 8105 System. Stores boot software applications, and events, errors, and battery logs.

IV Safety

Guardrails Suite MX software is the most comprehensive safety software available
The wirelessly enabled software is available on every device
Provides the right protection for every infusion by double-checking dose and duration, as well as delivery rate, protecting critical infusions like chemotherapy

Analytics

Guardrails software allows you to convert data into meaningful information, so you can quickly identify opportunities for clinical and operational improvement
With Guardrails CQI Reporter, you have the tools to spot subtle trends, measure the effectiveness of your IV formularies and best practices, and continuously optimize patient care