Quality Service And Products At Great Prices
610-268-1444Request A QuoteService Repairs
Sale!
Alaris Medsystem III 2865
alaris-medsystem-iii-2863
Alaris Medsystem III 2865 - Image 3

Alaris Medsystem III 2865

Original price was: $2,195.Current price is: $1,695.

The Ivac (Alaris) Medsystem III, (also known as the Minimed III,) is pole-mounted with three independently-programmed channels. The unit includes a Drug Dose Calculator, and adjustable pressure limits, in a small, lightweight unit.

 

SKU: 2865 Category: Brand:
✓ No Sales Tax
✓ 1 year warranty on equipment orders
✓ Commercial financing available for orders over $2,000

Alaris Medsystem III 2865 Multi-Channel Infusion pump

Units come patient ready in excellent condition with pole clamp and AC adapter.

1 Year warranty

The Alaris Medsystem III 2865 is an infusion pump that can be programmed to deliver at a specified rate or over a specific period of time. The 2865 is a multi-channel infusion pump featuring three independent fluid delivery systems that only occupy the space of one system. Running on 6 watts AC power, its main battery is a rechargeable NiCad Battery Pack Memory and it is equipped with a non-rechargeable Lithium back up battery. The Medsystem III’s small size allows for more flexibility when transporting patients and allows for a more organized bedside space. It provides advanced features, accurate delivery of a variety of fluids, and it is easy to setup and use. It weighs approximately 5.1 pounds including the pole clamp. The 2865 features a delivery rate range of 0.1 – 999 milliliters/hour for each channel and a KVO rate range of 0.1 – 20.0 milliliters/hour.

Features

  • Menu selection: General Purpose, General Purpose II, Neonatal, Controller Pressure, Operating Room and Operating Room II
  • Accurate delivery for intravenous, intra-arterial, epidural and subcutaneous applications
  • Secondary delivery of intermittent medications, fluid challenges or loading doses from each channel
  • Advanced dose rate calculation
  • Rapid on line titration for both macro and micro delivery without interrupting flow
  • Configurable air in line thresholds, rate and volume ranges, occlusion alarm settings and KVO rates
  • Comprehensive, selectable drug library
  • Titration of drugs in either dose or volumetric rate
  • Advanced biomedical features: streamline routine maintenance and calibration processes, troubleshooting by log recovery, programmable user messages and communication with remote monitoring systems

For the Medsystem III 2863, click here.

Weight 0.00 lbs
Dimensions 0.00 × 0.00 × 0.00 in

Reviews

There are no reviews yet.

Be the first to review “Alaris Medsystem III 2865”

Alaris Infusion Pump Specifications

Dimensions

  • Height: 8.8 In (22.4 cm)
  • Width: 6.9 In (17.5 cm)
  • Depth: 9 In (22.9 cm)
  • Weight: 7.2 lb (3.2 kg)

Battery

  • Battery run time is a function of the number of modules attached and module activity. With a new, fully charged battery, the system operates as follows before a “BATTERY DISCHARGED” message occurs:
  • 6 Hours: with one Pump module infusing at 25 mL/h
  • 6 Hours: with one Pump module infusing at 25 mL/h and one Auto-ID module
  • 3 Hours: with four Pump modules infusing at 25 mL/h
  • 3 Hours: with four Pump modules infusing at 25 mL/h and one Auto-ID module
  • 4.5 Hours: with one active SpO2 module
  • 6 Hours: with one Syringe module or PCA module infusing at 5 mL/h
  • 3 Hours: with four Syringe modules, or one PCA module and three Syringe modules, infusing at 5 mL/h
  • 4 Hours: with one active EtCO2 module

Communication Data Port

  • RS-232 with an RJ45 connector

Memory

  • The System configuration/data set is stored in compact flash memory along with operating software.
  • The events and error logs are stored in the onboard flash memory in the Alaris PC unit and modules. This is a nonvolatile memory and can be held indefinitely or until replaced with new data and not lost when power is turned off or the battery is in a weak/discharged state.
  • Module-specific parameters are stored for 8 hours when the system is turned off. After 8 hours of continuous off-time, or if a module is detached, module-specific trend data (if applicable) and module-specific operating parameters are automatically purged. If a PCA, SpO2, or EtCO2 module is detached and replaced with another PCA, SpO2, or EtCO2 module, its module-specific trend data is purged.
  • Memory will not be lost due to a weak/discharged battery as data is stored on flash memory as noted.
  • Compact flash memory: Stores application software, audio wave files, DataSet, and hex files data for operating system software, all needed to operate the Alaris PC Unit System.
  • On-board flash memory: Contains software needed to initially turn on the Alaris 8105 System. Stores boot software applications, and events, errors, and battery logs.

IV Safety

  • Guardrails Suite MX software is the most comprehensive safety software available
  • The wirelessly enabled software is available on every device
  • Provides the right protection for every infusion by double-checking dose and duration, as well as delivery rate, protecting critical infusions like chemotherapy

Analytics

  • Guardrails software allows you to convert data into meaningful information, so you can quickly identify opportunities for clinical and operational improvement
  • With Guardrails CQI Reporter, you have the tools to spot subtle trends, measure the effectiveness of your IV formularies and best practices, and continuously optimize patient care

Alaris-Medley-Pump-Module-8100-version-7lClick here to download the PDF file.

Related products